Re: LCAB03VLNOD send no emails
Sorry for that one. Motion Detection can be detected by measuring changes in the speed or vector of an object or objects in the monitored area. Try playing around with the camera's Sensitivity and...
View ArticleRe: LCAB03VLNOD send no emails
Can you check if the event is properly detected, for instance recording to SD card? It is maybe the event which is missing...On another register, I suppose you have no NAS/NVR: what apps do you use for...
View ArticleRe: LCAB03VLNOD send no emails
Hi everyoneIn fact, the camera works now, I don't know why but it's ok. Maybe I had made too many changes in the video settings.I just reset all settings to default ...Set my email settings without...
View ArticleRe: Camera Firmware and NTP Settings
This appears to be a bug in the firmware. Whenever my camera's reset due to a power outage, they never sync the time with whatever NTP time server that is built into the camera. There does not appear...
View ArticleClik here to view.
Re: Camera Firmware and NTP Settings
Hi there! Access the advanced settings of the camera and manually set the time zone. If you chose to sync with PC, the settings will revert back to factory defaults if the camera is powered off. Get...
View ArticleClik here to view.
Re: Camera Firmware and NTP Settings
You mean like the way that I always have had it setup, like this... This does not solve the issue, which is, whenever the camera loses power or is switched off/on, it never connects to the NTP server...
View ArticleRe: Camera Firmware and NTP Settings
Was the time setting working fine before? Try to set the camera to a different Time Zone and check the log again to see if the camera will be connect successfully to the NTP server.
View ArticleRe: Camera Firmware and NTP Settings
I don't know if it ever worked in my time zone. It was a really long time before I even realized what was going on.I will try a different time zone tonight and see if it synchronizes after a power cycle.
View ArticleRe: Camera Firmware and NTP Settings
I have tried many different time zones but the camera will not update the date & time in any of them. Once the camera is power cycled, it defaults to the Current Date/Time: 01/02/2005 00:00:00 and...
View ArticleRe: Camera Firmware and NTP Settings
We would like to assist you further about this matter, Edenkers. Please email us at LinksysCares@linksys.com with the link to this community thread and indicate your community username.
View ArticleWhy does linksys still use "192.168.1.115" and have it on their support pages?
"192.168.1.115" This obviously does not work when you try to access your camera such as the WVC80N which I have. I've reset the camera twice and reinstalled the software twice from the cd but trying...
View ArticleRe: Why does linksys still use "192.168.1.115" and have it on their support...
Hi! I'm not sure how was the reset done but you may press the Reset button until you hear it click, then hold it down for 10 seconds using a small-pointed tip (such as a pen or a paper clip). If you...
View ArticleRe: Why does linksys still use "192.168.1.115" and have it on their support...
I did the reset the only way it can be done by using a small pointed object to depress the recessed button inside the camera body for 30 seconds until the power light blinked.
View ArticleLCAB03VLNOD needs to be restarted occasionally
Hi.I have 4 LCAB03VLNOD cameras in our setup.I have 2 cams on one switch and 2 cams on another switch.Every once in a while I loose the signal to one or more cameras.I can ping them using cmd but I...
View ArticleRe: LCAB03VLNOD needs to be restarted occasionally
Hi ballumit, Thank you for sharing this information.May I know what are the model and brand of the POE switches that your 4 LCAB03VLNOD are connected to?Because POE switches have maximum power budget...
View ArticleRe: LCAB03VLNOD needs to be restarted occasionally
Hi, Ballumit, Have you tried resetting the cameras by pressing the reset button inside them? I found it out in this KB Article, http://www.linksys.com/ph/support-article?articleNum=136079#s4 . You can...
View ArticleDirect streaming on Youtube
Hi all!I would like to direct streaming some lessons on youtube.I need to satisfy two conditions: - the camera must have a wide-angle (as near to 180° as possible) - the camera must support an external...
View ArticleRe: Direct streaming on Youtube
Hello, orsomannaro. Linksys only has a wireless security camera. You may check for more information here: http://www.linksys.com/us/support-product?pid=01t80000003K7Y7AAK If this is for business...
View ArticleRe: How to find out external IP address of my WVC54GCA
Привет! Может быть, я могу помочь вам. Мой друг посоветовал мне бесплатный сервис whoiszz. Хорошего дня.
View Article